MOT Status
ExpiredMileage
108,744 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 28% (1.2.1 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear door sill/wing holed by corrosion
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear exhaust flange corroded
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))
Offside Rear door sill holed by corrosion
Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced door sill (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))
Offside Rear door sill holed by corrosion
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Rear door sill holed by corrosion
Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Rear door sill holed by corrosion
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive rear of door sill (5.2.6)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive rear of door sill (5.2.6)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
various slight corrosion
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
various slight corrosion
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
alight corrosion to under side of vehicle
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Rear brake disc slightly pitted (3.5.1h)
Nearside Front brake disc excessively pitted (3.5.1h)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front brake disc excessively pitted (3.5.1h)
Offside Rear brake disc slightly pitted (3.5.1h)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda MX-5?
Based on 2,502,760 MOT tests across 160,823 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WM03 HDF is a 2003 Mazda MX-5 in Silver with a 1,840cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 71.4%.
Across all 2003 Mazda MX-5 models, the average MOT pass rate is 75.2% with a typical mileage of 60,251 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MX-5 fails its MOT is seat belt anchorage prescribed area is excessively corroded, accounting for 44,475 recorded failures. If you're considering buying WM03 HDF, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-5 typically stays on UK roads for around 36 years. At 23 years old, this Mazda MX-5 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of WM03 HDF?
You can check the full history of WM03 HDF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WM03 HDF registered?
WM03 HDF is a 2003 Mazda MX-5, first registered on 31 March 2003.
Is WM03 HDF safe to buy?
The MOT history for WM03 HDF shows 21 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WM03 HDF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WM03 HDF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.