MOT Status
ExpiredMileage
133,672 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Body has slight corrosion underbody (6.1.B.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front coil spring corroded (2.4.C.1b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brake load sensing valve seized (3.6.E.3)
Nearside Front Inner Steering component mounting prescribed area is excessively corroded wing (2.2.C.1h)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis (6.1.B.2)
Nearside Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Shock absorber detached (2.7.2b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded spring mounting (2.4.A.3)
Offside Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.4.G.4e)
Offside Front Brake actuating linkage mounting prescribed area is excessively corroded (3.3.A.2)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis (6.1.B.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded spring mounting (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Front Front wheel bearing rough when rotated (2.5.A.2)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Direction indicator slightly discoloured (1.4.A.2f)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)
Nearside Rear Leaf spring has slight wear in an anchor pin and/or bush (2.4.B.2)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)
Offside Rear Leaf spring has slight wear in an anchor pin and/or bush (2.4.B.2)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
brake pedal rubber worn
damage to o/s/r outer sill
exhaust corroded
front crossmember corroded
o/s/r and n/s/r outer wheel arches corroded
o/s/r light unit broken
o/s/r tyre peirshed
oil leak
underside of vehicle rusty
all welding coverd in underseal
Brake load sensing valve seized (3.6.E.3)
Exhaust system not adequately supported (7.1.1)
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake lever has no reserve travel (3.1.6b)
Brake load sensing valve seized (3.6.E.3)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Steering system excessively tight (2.2.D.1)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)
Offside Rear Direction indicator slightly discoloured (1.4.A.2f)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c) DANGEROUS
Offside Headlamp not working on dipped beam (1.7.5a)
nearside front brake slightly binding
How Reliable is the Fiat Ducato?
Based on 1,962,737 MOT tests across 142,446 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WM52 KZW is a 2003 Fiat Ducato in White with a 1,997cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2003 Fiat Ducato models, the average MOT pass rate is 73.9% with a typical mileage of 44,259 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Ducato fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 34,174 recorded failures. If you're considering buying WM52 KZW, it's worth having these areas checked by a mechanic before committing.
The Fiat Ducato typically stays on UK roads for around 38 years. At 23 years old, this Fiat Ducato is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of WM52 KZW?
You can check the full history of WM52 KZW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WM52 KZW registered?
WM52 KZW is a 2003 Fiat Ducato, first registered on 30 January 2003.
Is WM52 KZW safe to buy?
The MOT history for WM52 KZW shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WM52 KZW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WM52 KZW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.