2017 Sym Crox

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front fairing slightly insecure

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pivot worn, but not excessively incorrect lever fitted (1.1.15 (b))

Rear Exhaust silencer slightly loose bracket has been modified (8.1.1 (b) (i))

Rear exhaust fouling engine

Steering headbearing has slight free play (2.2.2 (f) (i))

rear mudguard number plate holder slightly insecure

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp aim too high (4.1.2 (a))

Rear Brake cable insecure (1.1.15 (c))

Rear Brake lever insecure brake lever pivot bolt locking device missing (1.1.2 (e) (i))

Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front fairing slightly insecure

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Exhaust silencer slightly loose bracket has been modified (8.1.1 (b) (i))

Rear exhaust fouling engine

Steering headbearing has slight free play (2.2.2 (f) (i))

rear mudguard number plate holder slightly insecure

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Stop lamp not working (4.3.1 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Steering operation restricted in free movement from lock to lock (2.1.4 (c))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake poor efficiency

Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Stop lamp not working (4.3.1 (a) (ii))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Hugger fixing loose