2003 Mercedes-benz Vito

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Offside Front Tyre worn close to legal limit/worn on edge BALD inner edge. (5.2.3 (e))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Inner Tyre has ply or cords exposed Cords. (5.2.3 (d) (ii)) DANGEROUS

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Offside Front Tyre worn close to legal limit/worn on edge BALD inner edge. (5.2.3 (e))

Horn not working (7.7 (a))

Front Brake pipe corroded, covered in grease or other material Nearside and offside (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement Nearside and offside (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Nearside and offside sill (5.3.6 (a) (i))

Registration plate deteriorated but not likely to be misread Both (0.1 (b))

Nearside Headlamp aim too low (4.1.2 (a))

Front Brake pipe corroded, covered in grease or other material Nearside and offside (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement Nearside and offside (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Nearside and offside sill (5.3.6 (a) (i))

Registration plate deteriorated but not likely to be misread Both (0.1 (b))

Horn not working (7.7 (a))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Side repeater incorrect colour (4.4.3 (a))

Offside Parking brake effort 50% lower than Near side (136kg compared to 290kg)

Central Exhaust system insecure Mounting defective (6.1.2 (a))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Upper Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Parking brake effort 50% lower than Near side (136kg compared to 290kg)

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill and suspension components (6.2.2 (d) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Central Front Upper Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Windscreen washer provides insufficient washer liquid not working (8.2.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside front brake excessively fluctuating (3.7.B.3)

Offside front brake excessively fluctuating (3.7.B.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Body has slight corrosion inner wing (6.1.B.2)

Offside Rear Body has slight corrosion inner wing (6.1.B.2)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside front brake excessively fluctuating (3.7.B.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Body has slight corrosion inner wing (6.1.B.2)

Offside Rear Body has slight corrosion inner wing (6.1.B.2)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Centre Exhaust system not adequately supported (7.1.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Front constant velocity joint is excessively worn (2.5.C.1b)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Ball joint has excessive play (2.2.B.1f)

Offside Front Upper Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Brake load sensing valve seized (3.6.E.3)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Parking brake lever has no reserve travel (3.1.6b)

Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Front Headlamp aim too low (1.8)

Offside Front Direction indicators incorrect colour (1.4.A.2f)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Offside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Service brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)