2005 Honda S2000

general corrosion to rear suspension components

poor repair to nearside outer sill

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

general corrosion to rear suspension components

poor repair to nearside outer sill

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Electronic power steering not working (2.6 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Front Brake hose has slight corrosion to ferrule offside & nearside centre ferrules (1.1.12 (f) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Brake hose has slight corrosion to ferrule offside rear & nearside rear (1.1.12 (f) (i))

Exhaust noisy (8.1.1 (a))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Valve stem slightly damaged (5.2.3 (j))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Brake hose has slight corrosion to ferrule offside rear & nearside rear (1.1.12 (f) (i))

Exhaust noisy (8.1.1 (a))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Valve stem slightly damaged (5.2.3 (j))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Nail in tyre

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Offside front brake binding (3.7.B.1)

Nearside front brake juddering slightly (3.7.A.2b)

Offside front brake juddering slightly (3.7.A.2b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Headlamp aim too low (1.8)

Rear Brake pad(s) wearing thin (3.5.1g)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)