2008 Yamaha Yzf R125

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Offside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Offside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake pedal anti-slip provision missing (1.1.2 (c))

Brake pedal anti-slip provision missing (1.1.2 (c))

Front Brake disc contaminated (1.1.14 (b))

Front Wheel excessively distorted (5.2.2 (c) (i))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate incorrect (0.1 (c))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) DANGEROUS

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

exhaust silencer fouling swinging arm

front mudguard mount broken

nearside front footrest shortened,

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake pedal is bent and the brake cannot be readily applied (1.1.2 (d))

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Brake disc(s) has excessive run out (3.2.A1m)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain worn to excess (6.2.1e)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear reflector on motorcycle missing (1.4.1)

Front Tyre worn close to the legal limit (4.1.3(ii))