2011 Kia Rio

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both side inner (1.1.14 (a) (ii))

Front Coil spring corroded both side (5.3.1 (b) (i))

Front Lower Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake pad(s) wearing thin both side (1.1.13 (a) (ii))

Rear Coil spring corroded both side (5.3.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both side inner (1.1.14 (a) (ii))

Front Coil spring corroded both side (5.3.1 (b) (i))

Front Lower Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Headlamp aim too low (4.1.2 (a))

Rear Brake pad(s) wearing thin both side (1.1.13 (a) (ii))

Rear Coil spring corroded both side (5.3.1 (b) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Tyre tread depth below requirements of 1.6mm 175/70/14 (5.2.3 (e)) DANGEROUS

High level brake light is not working.

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Exhaust system insecure (6.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing o/s and n/s top mounts (2.5.B.3a)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

exhaust corroded

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Offside rear brake binding (3.7.B.1)

Windscreen wiper does not clear the windscreen effectively o/s and n/s (8.2.2)

Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing o/s and n/s top mounts (2.5.B.3a)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

exhaust corroded

Parking brake lever has little reserve travel (3.1.6b)

n/s front tyre worn on outer edge

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake lever has little reserve travel (3.1.6b)

n/s front tyre worn on outer edge

Front Brake pad(s) wearing thin (3.5.1g)

unable to correctly see rear pads to assess wear

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) wearing thin (3.5.1g)