2002 Fiat Scudo

Front Headlamp aim too low Both. (4.1.2 (a))

Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Front Power steering component leaking Leaking past gaiter. (2.1.5 (a))

Nearside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Offside Front Windscreen washer not working (3.5 (a))

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed From sidewall damage and tyre is underinflated. (5.2.3 (d) (ii)) DANGEROUS

Offside Front Play in steering rack inner joint(s) ()

Oil leak, but not excessive From engine. (8.4.1 (a) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre has ply or cords damaged (5.2.3 (d) (ii)) DANGEROUS

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive multiple leaks and possible power steering leak (8.4.1 (a) (i))

Brake performance not tested (1.2.1 (g))

Nearside Front Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive multiple leaks and possible power steering leak (8.4.1 (a) (i))

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Bonded suspension unit deteriorated and cannot function as intended axle (2.4.F.3)

Service brake: efficiency below requirements (3.7.B.7)

front brake application uneven, requires attention/ repair

Nearside Front Headlamp aim too low (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Spare tyre defective

Nearside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Spare tyre defective

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)