MOT Status
ExpiredMileage
189,305 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Steering rack has slight free play detected at steering wheel (2.3 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Headlamp aim too low (4.1.2 (a))
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Direction indicators incorrect colour (1.4.A.2f)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Front Subframe mounting prescribed area is excessively corroded both front rails/slam panels (2.4.A.3)
Offside Front Shock absorber casing corroded externally so the unit does not function (2.7.2a)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill/arch (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Suspension component mounting prescribed area is inadequately repaired old patches of weld insecure (2.4.A.3)
Rear Upper Suspension component mounting prescribed area is excessively corroded spring arm corroded (2.4.A.3)
Rear rear brake recording little or no effort (3.7.B.5a)
Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
heavy corrosion underside vehicle
rear chassis beam corroded
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
brake pipes undersealed
corrosion on rear cross member
exhaust manifold bolt missing
rear chassis to floor slightly corroded
slight corrosion on both inner sills
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
brake pipes undersealed
corrosion on rear cross member
exhaust manifold bolt missing
rear chassis to floor slightly corroded
slight corrosion on both inner sills
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
all rear chassis/floor slightly corroded
corrosion on rear cross member
slight corrosion on both inner sills
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Side repeater incorrect colour (1.4.A.2f)
Nearside Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Inner Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Steering lock fails to engage (2.1.4b)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Stop lamp not working (1.2.1b)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Brake cable has restricted free movement (3.5.1k)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Brake load sensing valve linkage stiff (3.6.E.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
nearside rear brake disc heavily corroded
Centre Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WN52 ZPX is a 2002 Mercedes-benz Vito in Blue with a 2,151cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 57.1%.
Across all 2002 Mercedes-benz Vito models, the average MOT pass rate is 65.4% with a typical mileage of 110,245 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying WN52 ZPX, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 24 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WN52 ZPX?
You can check the full history of WN52 ZPX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WN52 ZPX registered?
WN52 ZPX is a 2002 Mercedes-benz Vito, first registered on 13 December 2002.
Is WN52 ZPX safe to buy?
The MOT history for WN52 ZPX shows 21 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WN52 ZPX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WN52 ZPX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.