2004 Honda CBR125R

Fork inners are pitted seals may have a short service life.

Minor damage evident on clutch mount

Minor damage to rh footrest mount.

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Headlamp aim too low (4.1.2 (a))

Offside Rear All direction indicators not working (4.4.1 (a) (ii))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Rear reflector missing (4.8.2 (a) (ii))

Shock absorber has a serious fluid leak Both (5.3.2 (b))

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Minor damage evident on clutch mount

Minor damage to rh footrest mount.

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Steering movement slightly 'notchy' (2.2.1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Upper Steering movement slightly 'notchy' (2.2.1b)

Headlamp aim too high (1.6)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Upper Steering movement slightly 'notchy' (2.2.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Steering headbearing has slight free play (2.2.2)

nearside handlebar bent

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Handlebar deformed (2.1.1b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Front Direction indicator damaged and function impaired (1.5.3a)

Rear Brake pedal cannot be released smoothly (3.1.3d)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

Rear suspension bush has slight free play (2.4.A2a(i))

handlebars slightly out of alignment

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Roller brake test indicates a sticking brake (3.3.A1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)