2007 Alfa Romeo 159

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Power steering pipe/hose has slight seepage front (2.1.5 (a))

Rear Anti-roll bar linkage ball joint has slight play both (5.3.4 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Tyre worn close to legal limit/worn on edge Both sides (5.2.3 (e))

Offside Rear Outer Integral body structure is repaired but structural rigidity is not significantly reduced Sill. Covered in under-seal. (6.1.1 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Anti-roll bar linkage ball joint has slight play Both sides (5.3.4 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced Both sides (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Tyre worn close to legal limit/worn on edge Both sides (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Anti-roll bar linkage ball joint has slight play Both sides (5.3.4 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced Both sides (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))

Offside Rear Outer Suspension spring mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Engine mounting damaged but not to excess two (6.1.8 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced front and rear (6.1.1 (c) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Vehicle structure is corroded but structural rigidity is not significantly reduced front and rear (6.1.1 (c) (i))

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

oil leak

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

oil leak

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Minor corrosion on suspension and underbody.

Slight knock/rattle from N/S/F Corner, suspect ball joints.

All Tyres are approaching low.

Front Brake Discs are worn, especially N/S inner face. Replace at the next pad interval.

O/S/F Brake is binding minorly.

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front All position lamps not working (1.1.A.3b)