2008 Mazda 6

Front Inner Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

FRONT TYRES WORN OUTER EDGE

Front Suspension arm ball joint dust cover severely deteriorated N/S O/S UPPER (5.3.4 (b) (i))

Offside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

HAND BRAKE NEEDS ADJUSTMENT OR REPAIR

Headlamp has a product on the lens but not seriously reducing light output N/S O/S (4.1.4 (b))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Exhaust has a minor leak of exhaust gases JOINT (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

HAND BRAKE NEAR LEGAL LIMIT

Nearside Front Upper BALL JOINT DUST COVER DETERIORATED

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear position lamp lens damaged

rear silencer exhaust joint rusted

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear position lamp lens damaged

rear silencer exhaust joint rusted

Front Service brake lagging in operation (1.2.1 (d))

Nearside Front Tyre worn close to the legal limit inner and outer edges (4.1.E.1)

Offside Front Tyre worn close to the legal limit inner and outer edges (4.1.E.1)

Offside Rear light cluster damaged repaired with tape

Emissions not tested oil level substantially above maximum level (7.4.B.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside front brake binding (3.7.B.1)

front brake application uneven (3.7.B.2)

Nearside Front Tyre worn close to the legal limit inner and outer edges (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit inner and outer edges (4.1.E.1)

Offside Rear light cluster damaged repaired with tape

Nearside Front tyre wearing on edges

Offside Front tyre wearing on edges

Emissions not tested engine overfull with oil (7.4.B.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Body has a sharp edge caused by damage light cluster (6.1.C.1)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Nearside Front tyre wearing on edges

Offside Front tyre wearing on edges

front brakes slight uneven application

DPF light on

Plastic covers on underside of vehicle

DPF light on

Parking brake lever has little reserve travel (3.1.6b)

rear inner brake pads look worn

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front position lamp(s) not working (1.1.A.3b)

N/S/R tyre wearing on the outer edge

Offside Rear Registration plate lamp not working (1.1.C.1d)

N/S/R tyre wearing on the outer edge

Centre Rear Statutory seat belt missing (5.1.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

exhaust system corroding

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

exhaust system corroding

nearside front tyre down to 1.6mm in places