2013 Ktm 125

Clutch lever incorrectly positioned worn (6.2.7 (b))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement swing arm (5.3.4 (a) (i))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Clutch lever incorrectly positioned worn (6.2.7 (b))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Drive chain sprocket slightly loose (6.1.7 (c) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement swing arm (5.3.4 (a) (i))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Drive chain sprocket slightly loose (6.1.7 (c) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Rear Drive chain sprocket slightly loose (6.1.7 (c) (i))

Rear Valve stem slightly damaged (5.2.3 (j))

Rear Brake component slightly loose reservoir (1.1.21 (c))

Drive chain excessively loose (6.1.7 (c) (i))

Rear Drive chain sprocket excessively loose (6.1.7 (c) (i))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Rear Brake pad(s) less than 1.0 mm thick pads breaking apart (1.1.13 (a)) DANGEROUS

Rear Brake component slightly loose reservoir (1.1.21 (c))

Headlamp not working on main beam (4.1.1 (a) (ii))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))

Rear Footrest missing (6.2.12 (a))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Drive chain worn to excess (6.2.1e)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))