2014 Fiat Doblo

Engine mounting damaged but not to excess slight wearing engine mounting bush. (6.1.8 (a) (i))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement strut top mounting bearing slightly worn and bearing slightly rough in operation. (5.3.4 (a) (i))

Offside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes perishing/unbonding. (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing both rear tyres lightly perishing/cracking, tyres wearing on inne and outer edges. (5.2.3 (d) (ii))

both front tyres wearing on inner and outer edges.

Offside Front Coil spring fractured or broken coil spring broken. (5.3.1 (b) (i))

Offside Rear Coil spring fractured or broken coil spring broken. (5.3.1 (b) (i))

Offside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes starting to come unbonded. (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing both rear tyres lightly perishing/cracking, tyres wearing on inner and outer edges. (5.2.3 (d) (ii))

both front tyres wearing on inner and outer edges.

exhaust fumes under bonnet, injector blowing.

Offside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface defective. (4.8.1 (a) (i))

Oil leak, but not excessive engine oil leaks. (8.4.1 (a) (i))

Service brake fluctuating, but not excessively both front. (1.2.1 (e))

Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes perishing/coming unbonded. (5.3.4 (a) (i))

smell of exhaust fumes under bonnet, injector blowing.

Exhaust emissions exceed default limit of 0.7m-1 (8.2.2.2 (b))

Headlamp aim too high both front. (4.1.2 (a))

Nearside Body component damaged and likely to cause injury wing mirror and indicator lens damaged and causing sharpe edge. (6.2.1 (a) (i))

Nearside Rear Registration plate lamp likely to become detached (4.7.1 (c) (ii))

Offside Front Service brake lagging in operation (1.2.1 (d))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Registration plate inscription illegible (0.1 (b))

Nearside Rear Registration plate lamp insecure (4.7.1 (c) (i))

Nearside Rear Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Offside Front Brake pad(s) wearing thin inner brake pad very thin and close to min thickness 1.5mm. (1.1.13 (a) (ii))

Offside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Oil leak, but not excessive slight engine oil leaks. (8.4.1 (a) (i))

Service brake fluctuating, but not excessively front brakes. (1.2.1 (e))

Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes coming unbonded. (5.3.4 (a) (i))

smell of exhaust fumes under bonnet, injector blowing.

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Integral body structure is deformed but structural rigidity is not significantly reduced sill dented (6.1.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust emissions exceed default limit of 0.7m-1 (8.2.2.2 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Integral body structure is deformed but structural rigidity is not significantly reduced sill dented (6.1.1 (a) (i))