2002 Mazda MX-5

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Headlamp aim projected beam image is obviously incorrect misted (4.1.2 (c))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Direction indicator incorrect colour an offside wing indicators (4.4.3 (a))

Nearside Rear Position lamp not working and offside rear (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate does not conform to the specified requirements (0.1 (d))

Underside has surface rust

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Slight corrosion on under body & components

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

slight corrosion on under body and components

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

slight corrosion on under body and components

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front suspension arms ball joint perishing

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering anti roll bar mounting (6.1.A.1)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Stop lamp not working (1.2.1b)

Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering anti roll bar mounting (6.1.A.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

All four tyres are badly cracked and perished.

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Underside of car is very rusty.

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

All four tyres are badly cracked and perished.

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Underside of car is very rusty.

All four tyres are starting to crack and split on sidewalls.

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Floor pan (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

All four tyres are starting to crack and split on sidewalls.

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Floor pan (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Offside front floor pan rusty.

Offside front inner wing / chassis rail rusty.

Nearside Headlamp aim too high (1.8)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Headlamp aim too high (1.8)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside front floor pan rusty.

Offside front inner wing / chassis rail rusty.

Rear Brake pad(s) wearing thin (3.5.1g)