2002 Mercedes-benz Vito

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Play in steering rack inner joint(s) ()

Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

vehicle has various ares of corrosion to suspension components, chassis and sub-structure

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Play in steering rack inner joint(s) ()

Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

vehicle has various ares of corrosion to suspension components, chassis and sub-structure

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength excessive corrosion within 30cms of suspension mounting (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength corrosion within 30cms of spring mounting (5.3.6 (a) (i))

Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength excessive corrosion within 30cms of suspension mounting (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material across axle (1.1.11 (c))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Non Standard Road Wheels Fitted

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Vehicle has a lot of heavy surface corrosion to suspension components structure and sub structure

Offside Front Headlamp aim too high (4.1.2 (a))

Nearside Front inner cv boot split

N/S outer sill front to rear corroded

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

O/S inner sill front to rear corroded

O/S outer sill front to rear corroded

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

N/S outer sill front to rear corroded

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

O/S inner sill front to rear corroded

O/S inner sill front to rear corroded

O/S outer sill front to rear corroded

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust system has various areas of corrosion

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

inner sill corroded os ns

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust system has various areas of corrosion

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

nsr damper casing corroded

osr damper casing missing

Exhaust system not adequately supported (7.1.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front constant velocity joint is insecure (2.5.C.1b)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

nsr damper casing corroded

osr damper casing missing

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

hand brake high not on stop

rear discs pitted

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Stop lamp not working (1.2.1b)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)