2002 Kawasaki ZR-7

Brake disc in such a condition that it is seriously weakened rear (1.1.14 (a) (ii)) DANGEROUS

Brake pad(s) less than 1.0 mm thick rear pads (1.1.13 (a)) DANGEROUS

Headlamp aim too low (4.1.2 (a))

Exhaust noisy (7.1.2)

Front Tyre has a bulge caused by separation or partial failure of its structure (4.1.2a(ii))

Offside Front Direction indicators flashing more than 120 times per minute (1.5.1c)

Offside Rear Direction indicators flashing more than 120 times per minute (1.5.1c)

Rear Tyre has a bulge caused by separation or partial failure of its structure (4.1.2a(ii))

Exhaust noisy (7.1.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

front fork dust seals are deteriorated

Direction indicators flashing more than 120 times per minute (1.5.1c)

Headlamp aim too high (1.6)

Rear position lamp adversely affected by the operation of another lamp (1.1.3b)

Registration plate incorrect to small (6.3.1a)

Stop lamp affected by the operation of another lamp (1.3.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

chain guard insecure

front fork dust seals are deteriorated

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Hydraulic brake control feels spongy (3.1.4a)

Rear reflector on motorcycle missing (1.4.1)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pedal has inadequate reserve travel (3.1.3b)