2003 Fiat Scudo

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Central Stop lamp inop

Damage to front and Lear lamps

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust mounting defective (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front All direction indicators slightly discoloured (4.4.3 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Small hole in left side sill

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust mounting defective (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust mounting defective (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Subframe mounting prescribed area is corroded but not considered excessive Rear sill (2.4.A.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

brake disc worn, pitted or scored, but not seriously weakened Both fronts (3.5.1i)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front position lamp(s) not working (1.1.A.3b)

brake disc worn, pitted or scored, but not seriously weakened Both fronts (3.5.1i)

Brake pipe slightly corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brake pipe slightly corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Brake load sensing valve linkage stiff (3.6.E.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brake load sensing valve linkage seized (3.6.E.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brake fluid level below max.

Nearside Rear coil spring corroded (2.4.C.1b)

Oil leak

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brake load sensing valve stiff (3.6.E.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Brake load sensing valve stiff (3.6.E.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

N/S/R tyre side wall cracking

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

high level brake light not working