MOT Status
ValidMileage
100,695 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases hole after rear silencer (6.1.2 (a))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Exhaust has a minor leak of exhaust gases hole after rear silencer (6.1.2 (a))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Offside Front Anti-roll bar linkage insecurely attached link rod(stab link ) (5.3.3 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor (6.2.2 (d) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security body tub (6.2.2 (d) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor (6.2.2 (d) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security body tub (6.2.2 (d) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Central Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Cross Bar also effecting Fuel Tank Security (6.2.2 (d) (i))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Leaf spring fractured (5.3.1 (b) (i))
Offside Rear Leaf spring fractured (5.3.1 (b) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Brake fluid warning lamp illuminated (1.1.10 (f))
Brake hydraulic reservoir fluid level below minimum level (1.1.10 (d) (i))
Nearside Front Lower Steering linkage ball joint ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))
Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Headlamp aim not tested (4.1.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Position lamp showing white light to the rear (4.2.3 (a) (ii))
Nearside Rear Position lamp lens seriously defective (4.2.1 (b))
Offside Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Nearside Front Body component corroded and likely to cause injury bumper (6.2.1 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split (6.1.7 (g) (ii))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))
Fuel Pipe/s corroded ()
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust emissions exceed manufacturer's specified limit .90 (8.2.2.2 (a))
Windscreen washer not working (3.5 (a))
Windscreen wiper does not clear the windscreen effectively x2 (3.4 (b) (ii))
Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))
Fuel Pipe/s corroded ()
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced center (6.1.1 (c) (i))
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded axle (1.1.11 (c))
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))
Offside Windscreen washer provides insufficient washer liquid (3.5 (a))
Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Body has slight corrosion (6.1.B.2)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
both rear tyres slightly perished
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front front brake binding (3.7.B.1)
Offside Front front brake binding (3.7.B.1)
Body has slight corrosion (6.1.B.2)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
both rear tyres slightly perished
Vehicle structure has slight corrosion (6.1.A.1)
Brake pipe excessively corroded both front to rear (3.6.B.2c)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded (3.6.B.2c)
offside front tyre worn on inner egdge
Centre Exhaust system not adequately supported (7.1.1)
Offside Brake pipe slightly corroded (3.6.B.2c)
offside front tyre worn on inner egdge
Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
brake fluid level between min-max
off side front brake disc slightly worn on inside face
off side front wheel has slightly restricted movement
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Exhaust system not adequately supported (7.1.1)
Offside Rear Mechanical brake component has restricted free movement (3.5.1k)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Centre Exhaust system not adequately supported (7.1.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim not tested (1.8.A.1c)
Offside Headlamp not working on dipped beam (1.7.5a)
How Reliable is the Mazda B Series?
Based on 136,422 MOT tests across 9,870 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WP03 UCG is a 2003 Mazda B Series in Green with a 2,499cc diesel engine. This vehicle has been through 37 MOT tests with a personal pass rate of 54.1%.
Across all 2003 Mazda B Series models, the average MOT pass rate is 70.5% with a typical mileage of 84,674 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda B Series fails its MOT is brake pipe excessively corroded, accounting for 9,638 recorded failures. If you're considering buying WP03 UCG, it's worth having these areas checked by a mechanic before committing.
The Mazda B Series typically stays on UK roads for around 38 years. At 23 years old, this Mazda B Series is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of WP03 UCG?
You can check the full history of WP03 UCG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WP03 UCG registered?
WP03 UCG is a 2003 Mazda B Series, first registered on 27 June 2003.
Is WP03 UCG safe to buy?
The MOT history for WP03 UCG shows 37 tests with a 54.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WP03 UCG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WP03 UCG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.