2007 Honda SCV100

Front Valve stem slightly damaged (5.2.3 (j))

Steering headbearing has slight free play (2.2.2 (f) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Stop lamp not working (4.3.1 (a) (ii))

Front Valve stem slightly damaged (5.2.3 (j))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Wheel damaged but not to excess (5.2.2 (c) (i))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Suspect handlebars slightly insecure

Front Shock absorber has negligible damping effect inoperative (5.3.2 (b))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Valve stem slightly damaged (5.2.3 (j))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Wheel damaged but not to excess (5.2.2 (c) (i))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Suspect handlebars slightly insecure

Steering headbearing has slight free play (2.2.2 (f) (i))

suspect front tyre starting to perish

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Front suspension stiff

Front Suspension stiff - suspect starting to seize

Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Wheel bearing has slight play (5.1.3 (a) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Rear suspension bush has excessive free play (2.4.A2a(i))

Steering headbearing has excessive free play (2.2.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Exhaust mounting deteriorated. (7.1.1.c)

Exhaust slightly deteriorated (7.1.1a)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre valve too long and may rub on wheel hub.

Front Brake lever has inadequate reserve travel (3.1.3b)

Headlamp insecure (1.2.3b)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Exhaust mounting deteriorated. (7.1.1.c)

Exhaust slightly deteriorated (7.1.1a)

Front Brake lever pivots slightly worn (3.1.3a)

Rear Brake lever pivots slightly worn (3.1.3a)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre valve too long and may rub on wheel hub.

Brake cables stretched/worn allowing excessive lever travel.

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Nearside Brake lever pivots slightly worn (3.1.3a)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

front tyre valve stem cracking

Front wheel bearings have excessive free play (2.3.5b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Nearside Brake lever pivots slightly worn (3.1.3a)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

front tyre valve stem cracking

Front wheel bearings are slightly rough (2.3.5b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front wheel bearings are slightly rough (2.3.5b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)