2007 Gilera Smt

Registration plate slightly loose (0.1 (a))

Headlamp not working on dipped beam Both dip and main beam operate at same time (4.1.1 (a) (ii))

Rear Position lamp not working (4.2.1 (a))

Registration plate incorrect Number plate obscured by L-plate (0.1 (c))

Registration plate slightly loose (0.1 (a))

Brake disc(s) slightly worn Rear (3.2.A1l)

Brake lever is damaged but the brake can still be readily applied Front (3.1.3c)

Drive chain slightly loose (6.2.1d)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust mounting deteriorated. (7.1.1.c)

Exhaust noisy (7.1.2)

Fairing panels slightly insecure

Direction indicator not working Front Left and Front Right (1.5.1c)

Floor brake test indicates a binding brake Front (3.3.C2c)

Floor brake test indicates a binding brake Rear (3.3.C2c)

Handlebar handgrip not secure to handlebars. L/H (2.1.1c)

Headlamp aim so that beam "kick up" is not visible on the screen (1.6.B.1)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear position lamp insecure (1.1.1c)

Rear reflector on motorcycle missing (1.4.1)

Fairing panels slightly insecure

Brake disc(s) slightly worn Rear (3.2.A1l)

Brake lever is damaged but the brake can still be readily applied Front (3.1.3c)

Drive chain slightly loose (6.2.1d)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust mounting deteriorated. (7.1.1.c)

Exhaust noisy (7.1.2)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain excessively loose (6.2.1d)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear position lamp deteriorated and function impaired (1.1.1b)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain slightly loose (6.2.1d)

Direction indicator not working (1.5.1c)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Direction indicator damaged but function not impaired (1.5.3a)

Drive chain slightly loose (6.2.1d)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Wheel spoke slightly loose. (4.2.1b)

Steering movement slightly 'notchy' (2.2.1a)

front fender damaged

Direction indicators affected by the operation of another lamp (1.5.1c)

Exhaust is leaking and excessively noisey (7.1.1b)

Horn not working (1.7.3a)

Nearside Front Direction indicator flashing more than 120 times per minute (1.5.1c)

Nearside Rear Direction indicator not working (1.5.1c)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Fuel system component leaking (7.2.1a) DANGEROUS

Drive chain slightly loose (6.2.1d)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Wheel spoke slightly loose. (4.2.1b)

Steering movement slightly 'notchy' (2.2.1a)

front fender damaged

Drive chain slightly loose (6.2.1d)

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Brake disc(s) slightly worn (3.2.A1l)

nearside headlamp slightly deteriated

Front Brake locking device missing (3.2.A1e)

Nearside Front position lamp does not illuminate immediately when switched on (1.1.3a)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Nearside Rear Direction indicator damaged and function impaired (1.5.3a)

Nearside Rear Direction indicator incorrect colour (1.5.1b)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Rear Direction indicator not working (1.5.1c)

Drive chain slightly loose (6.2.1d)

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Brake disc(s) slightly worn (3.2.A1l)

nearside headlamp slightly deteriated

Exhaust noisy (7.1.2)

Rear Brake disc(s) has slight run out (3.2.A1m)

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Registration plate with character(s) which are not the correct height (6.3.4a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Exhaust noisy (7.1.2)

Oil leak

Rear Brake disc(s) has slight run out (3.2.A1m)

Brake lever is short but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(i))

Rear no.plate.

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Floor brake test indicates a binding brake (3.3.C2c)

Rear reflector on motorcycle missing (1.4.1)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(i))