2014 Honda Cbf

Rear Drive chain sprocket worn to excess chain and sprockets badly worn (6.1.7 (c) (i))

Rear Rear reflector missing (4.8.2 (a) (ii))

Rear Brake lining(s) less than 1.0 mm thick rear brake locking on arm going over center (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Wheel alignment incorrect which adversely affects the steering HANDLE BARS MISS ALIGNED (2.4 (a))

Rear Brake pedal has insufficient reserve travel REAR BRAKE HAS EXCESS TRAVEL (1.1.2 (a))

Rear Brake rod insecure SPLIT PIN MISSING IN REAR BRAKE ANCHOR (1.1.15 (c))

Front Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced FRONT MUDGAURD FRACTURED (6.1.1 (b) (ii)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm FRONT TYRE WORN BELOW LIMIT (5.2.3 (e)) DANGEROUS

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced swing arm corroded. (6.1.1 (c) (i))

fairing held together with zip ties.

All direction indicators not working (4.4.1 (a) (ii))

Clutch lever shortened so it cannot be readily operated broken at pivot. (6.2.7 (b))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Handlebar excessively deformed (2.2.1 (c) (i))

Headlamp aim too high (4.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced swing arm corroded. (6.1.1 (c) (i))

fairing held together with zip ties.

Drive chain slightly tight chain has tight spot (6.1.7 (k) (i))

Exhaust noisy (8.1.1 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced frame corroded at rear (6.1.1 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced swing arm corroded n/s (6.1.1 (c) (i))

Stop lamp not working when rear brake is applied (4.3.1 (a) (ii))