2003 Mercedes-benz Vito

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front wheel arch corroded

Offside Seat belt stitching slightly frayed (5.2.2b)

Offside headlamp pattern poor

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

nearside front & centre seat missing at time of retest

Central Seat belt retracting mechanism defective (5.2.5b)

Horn not working (1.6.2a)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner & outer sill (2.4.A.3)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Rear position lamp(s) incorrect colour damaged (1.1.A.3e)

Nearside Side repeater not working (1.4.A.2c)

Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Headlamp aim too far to the right wont adjust (1.8)

Offside Side repeater incorrect colour (1.4.A.2f)

Offside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front wheel arch corroded

Offside Seat belt stitching slightly frayed (5.2.2b)

Offside headlamp pattern poor

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Passenger seat(s) missing at time of test ()

Brake load sensing valve seized (3.6.E.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high (1.8)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Central Front Seat belt retracting mechanism defective (5.2.5b)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Headlamp levelling device inoperative (1.7.2)

Offside Rear Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Front Play in steering rack inner joint(s) both ()

Offside Front Shock absorber has a light misting of oil very weak (2.7.3)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Parking brake lever insecure (3.1.3b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside rear brake binding (3.7.B.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.A.3)

Nearside Front front brake binding (3.7.B.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front front brake binding (3.7.B.1)

Parking brake lever defective so that it cannot be satisfactorily operated (3.1.3c)

Side repeater slightly discoloured (1.4.A.2f)

surface corrosion n/s/r inner sill/filler neck area

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake pad(s) insecure (3.5.1g) DANGEROUS

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

chassis corroding at rear

rear x-member corroding

Front registration plate deteriorated (6.3.1d)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear registration plate deteriorated (6.3.1d)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Headlamp aim too low (1.8)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Headlamp aim beam image kick up to the offside (1.8)

Offside Front Headlamp aim beam image kick up to the offside (1.8)

Offside Registration plate lamp not working (1.1.5c)

Brakes imbalanced across an axle (3.7.B.5b)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)