2004 Lexus IS300

Front Windscreen washer not working (3.5 (a))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced closing panel (7.1.1 (a) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced closing panel (7.1.1 (a) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/sill closing (5.3.6 (a) (i))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/sill closing (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn inner edge

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Rear Both tyres worn inner edges

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn inner edge

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Rear Both tyres worn inner edges

Engine Management light indicates a fault

Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit inner edge worn smooth (4.1.E.1)

Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Play in steering rack inner joint(s) ()

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Engine Management light indicates a fault

Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit inner edge worn smooth (4.1.E.1)

Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Play in steering rack inner joint(s) ()

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Under-trays fitted obscuring some underside components

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)