2007 Mercedes-benz Vito

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Inner Drive shaft joint constant velocity boot severely deteriorated both sides (6.1.7 (g) (i))

Rear Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Front Inner Anti-roll bar pin or bush excessively worn both D bushes (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Body component insecure mirror casing (6.2.1 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Inner Drive shaft joint constant velocity boot severely deteriorated both sides (6.1.7 (g) (i))

Rear Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill chalked (5.3.6 (a) (i))

Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill chalked (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Obligatory mirror slightly damaged door glass (3.3 (b) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Central Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Road wheel slightly distorted inner rim (5.2.2 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Central Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Road wheel slightly distorted inner rim (5.2.2 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front jacking point areas corroded

Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front jacking point areas corroded

Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Nearside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front jacking point area corroded - both sides

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Service brake excessively fluctuating both sides (1.2.1 (e))

Rear Service brake imbalanced across an axle (1.2.1 (b) (i))

Front jacking point area corroded - both sides

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Inner Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Headlamp aim beam image obviously incorrect Condensation (1.8.A.1b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Windscreen wiper does not clear the windscreen effectively Both (8.2.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Front Inner Anti-roll bar linkage has slight play in a pin/bush Both D bushes (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Inner Anti-roll bar linkage has slight play in a pin/bush Both D bushes (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Parking brake lever has little reserve travel (3.1.6b)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear coil spring broken (2.4.C.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Front position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Front position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Wheel trims fitted.