2013 Fiat Doblo

Brake lever has insufficient reserve travel (1.1.2 (a))

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner sill (7.1.1 (a) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Oil leaking excessively from engine (8.4.1 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Central Exhaust mounting defective (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Brake pipe corroded, covered in grease or other material All (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material All (1.1.11 (c))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material grease on brake pipe (1.1.11 (c))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Brake pipe corroded, covered in grease or other material grease on brake pipe (1.1.11 (c))

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)