2002 Peugeot Boxer

Play in steering rack inner joint(s) ()

Play in steering rack inner joint(s) ()

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Play in steering rack inner joint(s) ()

Nearside Rear Shock absorbers insecurely attached (5.3.2 (a) (i))

Offside Rear Shock absorbers insecurely attached (5.3.2 (a) (i))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced out rigger (6.1.1 (c) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

head lights blue tinge

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing wheel arch. (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i))

Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced inner sill to step weld failed (6.1.1 (a) (i))

Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced inner step to sill weld failed (6.1.1 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced out rigger (6.1.1 (c) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

head lights blue tinge

Front Seat belt anchorage prescribed area is corroded but not considered excessive both sides steps (7.1.1 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both sides inner wing / step (5.3.6 (a) (i))

Exhaust system insecure (6.1.2 (a))

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both sides inner wing / step (5.3.6 (a) (i))

Front Wheel bearing has slight play both sides (5.1.3 (a) (i))

Exhaust system not adequately supported rubbers broken/missing (7.1.1)

Headlamp switch faulty dipped/main beam switch intermittant fault (1.7.1)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Shock absorber detached broken off (2.7.2b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Shock absorber detached broken off (2.7.2b)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

exhaust rubbers deteriating

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

exhaust rubbers deteriating

tyre sidewalls have surface cracking

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

as original vt32

Service brake: efficiency below requirements (3.7.B.7)

engine undertray fitted

slight play in front whelbearings

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

foot and parking brake efficiencies close to limit

handbrake cable corroded