2003 Mazda MX-5

Front Suspension component corroded but not seriously weakened all components (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Suspension component corroded but not seriously weakened all components (5.3.3 (b) (i))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Vehicle structure is repaired but structural rigidity is not significantly reduced n/s and o/s sills (6.1.1 (d) (i))

Driver's airbag missing (7.1.5 (a))

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Nearside Front Suspension arm corroded but not seriously weakened Upper & Lower (5.3.3 (b) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis / Inner wing (6.1.1 (c) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive Outer sill (7.1.1 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened Upper & Lower (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened Upper & Lower (5.3.3 (b) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis / inner wing (6.1.1 (c) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened Upper & Lower (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

corrosion on inner & outer sills

corrosion on suspension components

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Rear Outer Body has a projection caused by corrosion sill (6.1.C.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Items removed from driver's view prior to test

Vehicle's internal headlight adjuster altered to recheck lights

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)