2004 Fiat Stilo

Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt both sides (2.4.G.2)

Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt both sides (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Gearbox mounting defective ()

Offside Front Outer sill corroded

Offside Front Seat belt cut but webbing not significantly weakened (5.2.2a)

Offside Rear Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Oil leak ()

Rear Body has slight corrosion (6.1.B.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt both sides (2.4.G.2)

Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt both sides (2.4.G.2)

Front Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Gearbox mounting defective ()

Offside Front Outer sill corroded

Offside Front Seat belt cut but webbing not significantly weakened (5.2.2a)

Offside Rear Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Oil leak ()

Rear Body has slight corrosion (6.1.B.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Central Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Windscreen wiper does not clear the windscreen effectively both rubbers split (8.2.2)

Nearside Headlamp aim too low (1.8)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt both sides top & bottom (2.4.G.2)

Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt both sides (2.4.G.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Gearbox mounting defective ()

Offside Front Seat belt cut but webbing not significantly weakened (5.2.2a)

Offside Rear Rear position lamp(s) deteriorated, but still visible from a reasonable distance lens cracked (1.1.A.3d)

Towball/hitch not fitted at time of test ()

coil spring corroded all 4 (2.4.C.1b)

Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Exhaust has a minor leak of exhaust gases (7.1.2)

exhaust corroded

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Engine covers fitted obscuring some components in the engine bay

Front Shock absorber has slight corrosion to the casing (2.7.2a)

exhaust corroded to the rear on bend

Items removed from driver's view prior to test

Under-trays fitted obscuring some underside components

both front & both rear tyres perished

offside rear light lens cracked

play in nearside & offside rear axle beam bushes

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)