2005 Fiat Punto

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill corroded (6.2.2 (d) (i))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch to boot floor front and rear (6.2.2 (d) (i))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill corroded (6.2.2 (d) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch to boot floor and filler neck area (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point on floor (6.2.2 (d) (i))

Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Front Upper Shock absorbers has a slightly worn bush top mountings worn (5.3.2 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Seat belt anchorage prescribed area is inadequately repaired in wheelarch - repaired with filler (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced in wheelarch (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Seat belt anchorage prescribed area is inadequately repaired floorpan (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Seat belt anchorage prescribed area is inadequately repaired in wheelarch - repairs loose (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced in wheelarch (7.1.1 (a) (i))

Windscreen washer not working (3.5 (a))

Front Exhaust mounting defective (6.1.2 (a))

Suspension arm pin or bush worn but not resulting in excessive movement o/s front lower arm (5.3.4 (a) (i))

front subframe heavy rust

Direction indicator not working n/s front (4.4.1 (a) (ii))

Headlamp not working on dipped beam n/s (4.1.1 (a) (ii))

Headlamp not working on dipped beam o/s (4.1.1 (a) (ii))

Seat belt anchorage prescribed area strength or continuity significantly reduced o/s rear inner wing (7.1.1 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement o/s front lower arm (5.3.4 (a) (i))

front subframe heavy rust

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material brake pipe to the flexy hose (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material to the flexy hose (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to inner wheel arch (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material brake pipe to the flexy hose (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material to the flexy hose (1.1.11 (c))

Nearside Front Shock absorber has a serious fluid leak strut (2.7.3)

Offside Front front brake binding (3.7.B.1)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Headlamp aim too high (1.8)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 0.884 (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive 3.57% (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive 8.16% (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive 483ppm (7.3.D.3)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

n/s brake disc rusted on inner face

o/s rear tyre cracking on inner sidewall 165/70/14

rear exhaust rubber mounting split

Both front tyres cracked on sidewalls

Offside Front coil spring incomplete (2.4.C.1a)

Both front tyres cracked on sidewalls

Nail in offside front tyre

Offside Headlamp aim too high (1.8)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)