2012 Mercedes-benz Vito

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Inner Subframe mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area damaged but not considered excessive floor and inner sill (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Inner Subframe mounting prescribed area damaged but not considered excessive floor and inner sill (5.3.6 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Inner Suspension component mounting prescribed area damaged but not considered excessive floor and inner sill (5.3.6 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Inner Suspension component mounting prescribed area damaged but not considered excessive floor and inner sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

under vehicle corroded

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both front floors/ inner sills (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear floors / inner sills (5.3.6 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Suspension component mounting prescribed area is corroded but not considered excessive both front floors/ inner sills (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear floors / inner sills (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)