2016 Yamaha Yzf

Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Rear Direction indicator insecure (4.4.1 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate slightly loose (0.1 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Nearside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Rear Direction indicator insecure (4.4.1 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Registration plate slightly loose (0.1 (a))

Suspension pin, bush or joint worn but not resulting in excessive movement Swingarm (5.3.4 (a) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Nearside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Rear Direction indicator insecure (4.4.1 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Registration plate slightly loose (0.1 (a))

Suspension pin, bush or joint worn but not resulting in excessive movement Swingarm (5.3.4 (a) (i))

Rear Brake linkage has restricted free movement (1.1.15 (e))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))

Exhaust noisy (8.1.1 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Exhaust slightly loose (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Offside Front Footrest insecure (6.2.12 (a))

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear reflector missing (4.8.2 (a) (ii))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Rear Direction indicator insecure (4.4.1 (c) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))