2001 Kia Rio

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Macpherson strut corroded but not seriously weakened both sides (5.3.3 (b) (i))

Front Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill under wheel arch (6.1.1 (c) (i))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Macpherson strut corroded but not seriously weakened both sides (5.3.3 (b) (i))

Front Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Front Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Front Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Passenger seat(s) missing at time of test ()

Front Headlamp has a product on the lens so that the light output is severely reduced both sides (4.1.4 (b))

Front Windscreen wiper does not clear the windscreen effectively both sides (3.4 (b) (ii))

Nearside Rear Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Front Headlamp lens slightly defective both ides (4.1.1 (b) (i))

Front Tyre obviously under inflated both sides (5.2.3 (l))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Passenger seat(s) missing at time of test ()

Rear Tyre obviously under inflated both sides (5.2.3 (l))

Rear Passenger seat(s) missing at time of test ()

Brake lever has insufficient reserve travel (1.1.2 (a))

Offside Front Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Rear Passenger seat(s) missing at time of test ()

Front Service brake binding but not excessively both sides (1.2.1 (f))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear brake back plates starting to corrode

Headlamp has a product on the lens so that the light output is severely reduced both sides (4.1.4 (b))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Front Service brake binding but not excessively both sides (1.2.1 (f))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear brake back plates starting to corrode

Front Exhaust has a major leak of exhaust gases (7.1.2)

Rear Brake pipe excessively corroded both sides (3.6.B.2c)

Rear Passenger's seat insecure (6.2.A.1)

both head lamp lens hazed

unable to check rear seat belts

Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear Brake pipe slightly corroded (3.6.B.2c)

front exhaust flexi deteriated

Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

n/s/r brake lower efficiency than o/s/r

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp aim too far to the right (1.8)

Offside Headlamp aim too low (1.8)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

n/s/r brake lower efficiency than o/s/r

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside rear brake binding (3.7.B.1)

n/s/f tyre tread wearing on inner edge

n/s/r tyre tread wearing on both edges

Front Exhaust mounting missing (7.1.1b)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

n/s/f tyre tread wearing on inner edge

n/s/r service brake does not apply at same rate as o/s/r

n/s/r tyre tread wearing on both edges

Nearside rear brake binding (3.7.B.1)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear wiper blade split

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear wiper blade split

Offside Rear wheel bearing has slight play (2.6.2)

front brake inspection required front pads appear to be worn thin.

n/s/f+o/s/f tyres wearing on inner edge

tracking required

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear wheel bearing has slight play (2.6.2)

front brake inspection required front pads appear to be worn thin.

n/s/f+o/s/f tyres wearing on inner edge

tracking required

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear wheel bearing (2.6.1)