2003 Mercedes-benz Vito

Front Window excessively tinted but not adversely affecting driver's view Side windows (3.2 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Trailer electrical socket likely to become detached (4.10 (a) (ii))

Front Window excessively tinted but not adversely affecting driver's view Side windows (3.2 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Towball/hitch not fitted at time of test

Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Parking brake lever missing (1.1.6 (d))

Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Towball/hitch not fitted at time of test

Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction air freshner (3.1 (a) (ii))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Parking brake lever missing (1.1.6 (d))

Nearside Rear Inner Vehicle structure is fractured and so weakened within 30cm of a towbar mounting, the towbar is likely to become detached arch (6.1.6 (i) (ii)) DANGEROUS

Nearside Rear Vehicle structure is fractured and so weakened within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) DANGEROUS

Offside Rear Vehicle structure is fractured and so weakened within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Window excessively tinted but not adversely affecting driver's view (3.2 (b) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Seat belt slightly damaged (7.1.2 (b) (i))

Offside Front Window excessively tinted but not adversely affecting driver's view (3.2 (b) (i))

Offside Rear Inner arch rusty but not holed

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

general under body covered in surface rust

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Headlamp not working on main beam (4.1.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength central sill (5.3.6 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Central Front Exhaust mounting defective (6.1.2 (a))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Nail in tyre

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

under vechile corrosion

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Windscreen in an unacceptable condition cracked in zone a (3.2 (c) (i))

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Central Front Exhaust mounting defective (6.1.2 (a))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Nail in tyre

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

under vechile corrosion

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill outside of prescribed areas (6.1.1 (c) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear inner sills (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill outside of prescribed areas (6.1.1 (c) (i))

Offside Side repeater incorrect colour (4.4.3 (a))

Suspension component mounting prescribed area is corroded but not considered excessive both rear inner sills (5.3.6 (a) (i))

Nearside Front Lower Front suspension has excessive movement at a suspension ball joint as marked (2.5.A.1c)

Offside Rear rear brake recording little or no effort pk brake (3.7.B.5a)

Offside Rear rear brake recording little or no effort service brake (3.7.B.5a)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brake load sensing valve seized (3.6.E.3)

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Rear Brake load sensing valve seized (3.6.E.3)

Front position lamp(s) not working (1.1.A.3b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Road wheel slightly damaged (4.2.A.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Road wheel slightly damaged (4.2.A.1a)

Offside Front Road wheel slightly damaged (4.2.A.1a)

front exhaust mounting slightly deteriorated

nearside front headlamp lense slightly damaged

Nearside Front Road wheel slightly damaged (4.2.A.1a)

Nearside Rear Road wheel slightly damaged (4.2.A.1a)

Offside Front Road wheel slightly damaged (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

front exhaust mounting slightly deteriorated

nearside fromt headlamp lense slightly damaged

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear fog lamp not working (1.3.2b)