2005 Fiat Ducato

Body work in places damaged

Nearside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Underside rusty and weak in places

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive inner and outer sills and floor area (5.2.6)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills and floor area (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills and floor area (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear fog lamp not working (1.3.2b)

Trailer electrical socket damaged so that lead cannot be securely connected (1.9.3b)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive inner and outer sills and floor area (5.2.6)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills and floor area (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills and floor area (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive hole in inner sills not within 30cm of mounting (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Oil leak

Nearside Headlamp aim too far to the right (1.8)

Offside Headlamp aim too far to the right (1.8)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Rear rear brake application uneven (3.7.B.2)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Oil leak

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Exhaust has part of the system excessively deteriorated (7.1.1a)

Service brake: efficiency below requirements (3.7.B.7)

Offside Front Brake pad(s) wearing thin (3.5.1g)