2006 Toyota Aygo

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Rear axle corroding

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Hazard warning switch faulty (4.4.2 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Side repeater not working (1.4.A.2c)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Rear Direction indicator not working (1.4.A.2c)

Offside Side repeater not working (1.4.A.2c)

Offside Stop lamp not working (1.2.1b)

Emissions not tested Due to exhaust blow (7.3.A.1)

Hazard warning lamps inoperative (1.4.B.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

exhaust system deteriorated

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)

Offside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Rear Stop lamp emits other than a steady red light (1.2.1e)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

exhaust system deteriorated

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

n/s/r wheeland tyre showing signs of fouling but not at time of test

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Emissions not tested (7.0)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)