2003 Aprilia RS125

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

horn switch requires attention soon

Brake pedal pivots slightly worn (3.1.3a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Fairings insecure but not likely to impede the steering (2.1.2e)

Front wheel bearings are slightly rough (2.3.5b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Wheel alignment slightly misaligned. (2.5.1)

Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Drive chain sprocket carrier worn to excess (6.2.1e)

Exhaust is leaking and excessively noisey (7.1.1b)

Headlamp aim too low (1.6)

Horn not working (1.7.3a)

Seat insecure (6.2.1a)

Front mudguard can easily contact the tyre (2.3.7) DANGEROUS

Front mudguard insecure (2.3.7) DANGEROUS

Front wheel bearings are slightly rough (2.3.5b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Wheel alignment slightly misaligned. (2.5.1)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre valve stem slightly damaged (4.1.2c)

Rear Brake disc(s) slightly scored (3.2.A1l)

gear lever bolt loose

left rider foot rear broken

Rear wheel spindle loose (2.4.A.2b) DANGEROUS

Drive chain excessively tight (6.2.1d)

Front Brake hose excessively chafed (3.2.B3a)

Fuel system component leaking (7.2.1a)

Headlamp aim too high (1.6)

Indicator tell tale not functioning (1.5.2)

Nearside Front Direction indicator not working (1.5.1c)

Offside Front Direction indicator not working (1.5.1c)

Rear Direction indicator affected by the operation of another lamp (1.5.1c)

Rear Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Registration plate deteriorated (6.3.1d)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre valve stem slightly damaged (4.1.2c)

Rear Brake disc(s) slightly scored (3.2.A1l)

gear lever bolt loose

left rider foot rear broken

Clutch lever bent (6.2.1g)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Steering headbearing has slight free play (2.2.2)

Front Brake hose excessively chafed (3.2.B3a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Drive chain worn but not considered excessive (6.2.1e)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Drive chain sprocket slightly worn (6.2.1e)