2003 Honda CB1300

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

drive chain has tight links

Drive chain excessively tight (6.2.1d)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Brake caliper(s) securing bolt(s) missing (3.2.A1j)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

drive chain has tight links

Drive chain excessively tight (6.2.1d)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Stop lamp does not illuminate immediately a brake applies Front switch (1.3.1a)

Exhaust noisy (7.1.2)

Nearside Rear suspension component slightly corroded. Damper rod (2.4.A.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly 'notchy' (2.2.1b)

Exhaust noisy (7.1.2)

Exhaust noisy (7.1.2)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Indicator tell tale not functioning (1.5.2)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Throttle operating incorrectly (6.2.1f)