2004 Suzuki SV650

Front Brake excessively binding (1.2.1 (f))

rear flexy bracket insecure

Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Lower Forks insecure Yoke bolt missing. (2.2.2 (d) (i))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear Suspension arm pin or bush excessively worn Linkage bolt on swing arm worn to excess. (5.3.4 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Exhaust clamp rusted through

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively Disc buttons worn. (1.1.14 (a) (i))

Nearside Front Footrest hanger bent and no anti slip rubber fitted.

Rear Brake reservoir insecure (bolt missing).

Exhaust noisy Baffle fitted (8.1.1 (a))

Rear Exhaust noisy (8.1.1 (a))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened + rotor bobbins (1.1.14 (a) (ii))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Registration plate deteriorated but not likely to be misread damaged (0.1 (b))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened + rotor bobbins (1.1.14 (a) (ii))

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Registration plate deteriorated but not likely to be misread damaged (0.1 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake disc(s) slightly worn rotor bobbins (3.2.A1l)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Brake disc(s) slightly worn rotor bobbins (3.2.A1l)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Brake disc(s) slightly worn rotor bobbins (3.2.A1l)

Clutch lever bent (6.2.1g)

Drive chain slightly loose (6.2.1d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front position lamp damaged but function not impaired o/s not working (1.1.1b)

Headlamp damaged but function not impaired n/s main beam not working (1.2.3a)

Nearside Headlamp damaged but function not impaired dipped beam not working (1.2.3a)

Rear Tyre worn close to the legal limit uneven wear / flat in center (4.1.3(ii))

Steering headbearing has slight free play (2.2.2)

n/s/f peg bent

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Steering headbearing has slight free play (2.2.2)

n/s/f peg bent

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Headlamp aim too high and too far to the right. (1.6)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension bush has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Brake pedal cannot be applied smoothly (3.1.3d)

Drive chain excessively loose (6.2.1d)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Headlamp aim too low (1.6)

Horn not working (1.7.3a)

An item not tested (Manual)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear suspension movement is excessively stiff (2.4.A.3b)

Riders seat insecure (6.2.1a)

Nearside Rear suspension bearing has slight free play (2.4.A2a(i))

Offside Rear suspension bearing has slight free play (2.4.A2a(i))