2004 Ci Motorhome Fiat

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Tyre slightly damaged/cracking or perishing all tyres (5.2.3 (d) (ii))

Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))

Front Headlamp aim too low both (4.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))

Front Service brake binding but not excessively (1.2.1 (f))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount area (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount area (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Power steering pipe/hose slightly corroded from rack forward. (2.1.5 (g) (i))

Offside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner box area holed . (5.3.6 (a) (i))

Offside Front Power steering pipe/hose modification unsafe pipe from rack forward insecure. (2.1.5 (f) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Power steering pipe/hose slightly corroded from rack forward. (2.1.5 (g) (i))

Brake pipe slightly corroded front to rear (3.6.B.2c)

Battery insecure (1.9.1)

Electrical wiring inadequately supported (1.9.2a)

Front Brake hose excessively deteriorated all 4 flexis (3.6.B.4d)

Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Rear fog lamp not working (1.3.2b)

Brake pipe slightly corroded front to rear (3.6.B.2c)

Body has slight corrosion (6.1.B.2)

Vehicle structure has slight corrosion (6.1.B.2)

Body has slight corrosion (6.1.B.2)

Vehicle structure has slight corrosion (6.1.B.2)

Body has slight corrosion (6.1.B.2)

Vehicle structure has slight corrosion (6.1.B.2)

Vehicle structure has slight corrosion (6.1.B.2)

n/s/f tyre cracking o cords exsposed

All light underbody corrosion

Both rear tyres perished

Exhaust corroded

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front wheel bearing rough when rotated (2.5.A.2)

All light underbody corrosion

Both rear tyres perished

Exhaust corroded

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

general corrosion

oversized nearside wiper blade

nearside wiper blade oversized

offside front marker lamp inoperative

unable to clearly view inner front brake pads

Rear bumper insecure