2008 Fiat Doblo

Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Headlamp has a product on the lens but not seriously reducing light output both lamps (4.1.4 (b))

Nearside Rear Outer door handle working intermittently

Offside Rear Exhaust mounting defective (6.1.2 (a))

Front Outer Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Hydraulic leak, but not excessive steering rack weeping (8.4.1 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Tyre has ply or cords damaged (5.2.3 (d) (ii)) DANGEROUS

Front Outer Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Hydraulic leak, but not excessive steering rack weeping (8.4.1 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Emissions unable to be completed exhaust (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Exhaust has a major leak of exhaust gases flexi (6.1.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp aim too low and too far to the right. (4.1.2 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim too far to the right (4.1.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp levelling device inoperative (4.1.5 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

under trays fitted obstructing some underside components

Nearside Rear brakes slight bind

under tray fitted obstructing some underside components

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear brakes slight bind

under tray fitted obstructing some underside components

Nearside Rear tyre perished and cracked

under tray insecure

Nearside Front Headlamp aim too high (1.8)

Nearside Rear tyre perished and cracked

Offside Front Headlamp aim too low (1.8)

under tray insecure

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Rear Upper Shock absorber has a slightly worn bush (2.7.4)