2008 Toyota Aygo

Headlamp has a product on the lens but not seriously reducing light output Both. (4.1.4 (b))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front headlight not working at the start of m/o/t come on when wiring moved recomend bulb replacement

Rear Brake pipe corroded, covered in grease or other material both sides front to rear pipes (1.1.11 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front headlight not working at the start of m/o/t come on when wiring moved recomend bulb replacement

Rear Brake pipe corroded, covered in grease or other material both sides front to rear pipes (1.1.11 (c))

Rear Exhaust mounting defective (6.1.2 (a))

Headlamp lens slightly defective both sides starting to cloud (4.1.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Side repeater slightly discoloured (4.4.3 (a))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))

Rear Exhaust mounting defective (6.1.2 (a))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Headlamp aim projected beam image is obviously incorrect bulb wedged in with wood (4.1.2 (c))

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

advise exhaust supported by wire

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

advise exhaust supported by wire

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)