2001 Piaggio Zip

Centre Lower Motorcycle structure slightly corroded (6.1.1a)

Centre Upper Front suspension assembly slightly corroded. (2.3.1)

Front Tyre worn close to the legal limit (4.1.3(i))

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front suspension has a slightly reduced damping effect (2.3.6c)

Headlamp aim too low (1.6)

Nearside Front suspension assembly has slight free play between the sliding members (2.3.4)

Nearside Front suspension assembly slightly corroded. (2.3.1)

Offside Front suspension assembly has slight free play between the sliding members (2.3.4)

Oil leak

Steering headbearing has slight free play (2.2.2)

front tyre cracking

slight binding front brake not enough to show on tester

Centre Lower Motorcycle structure slightly corroded (6.1.1a)

Centre Upper Front suspension assembly slightly corroded. (2.3.1)

Front Tyre worn close to the legal limit (4.1.3(i))

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front suspension has a slightly reduced damping effect (2.3.6c)

Nearside Front suspension assembly has slight free play between the sliding members (2.3.4)

Nearside Front suspension assembly slightly corroded. (2.3.1)

Offside Front suspension assembly has slight free play between the sliding members (2.3.4)

Oil leak

Steering headbearing has slight free play (2.2.2)

front tyre cracking

slight binding front brake not enough to show on tester

Exhaust slightly deteriorated (7.1.1a)

Lower Front suspension assembly has slight free play between the sliding members (2.3.4)

Nearside Lower Front suspension assembly slightly corroded. (2.3.1)

Rear Tyre worn close to the legal limit (4.1.3(i))

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

Oil leak

Headlamp aim too low (1.6)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Roller brake test indicates a binding brake (3.3.A1a)

Headlamp deteriorated and function impaired (1.2.3a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Exhaust slightly deteriorated (7.1.1a)

Lower Front suspension assembly has slight free play between the sliding members (2.3.4)

Nearside Lower Front suspension assembly slightly corroded. (2.3.1)

Rear Tyre worn close to the legal limit (4.1.3(i))

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

front and rear tyre pressure low

Oil leak

Front suspension assembly has slight free play between the sliding members (2.3.4)

Rear shock absorber has a light misting (2.4.A.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Steering movement slightly rough. (2.2.1b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Horn not working (1.7.3a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Throttle operating incorrectly (6.2.1f)

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Rear shock absorber has a light misting (2.4.A.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Steering movement slightly rough. (2.2.1b)

Steering movement slightly 'notchy' (2.2.1b)

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Indicator switch defective (1.5.4)

Nearside Front suspension has inadequate damping effect. (2.3.6c)

Offside Front suspension has inadequate damping effect. (2.3.6c)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Steering movement slightly 'notchy' (2.2.1b)