2006 Peugeot 107

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output Frosted (4.1.4 (b))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Inner and outer sills (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle mount (5.3.6 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output Frosted (4.1.4 (b))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced Inner and outer sills (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle mount (5.3.6 (a) (i))

Rear axle beam corroded

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output Frosted (4.1.4 (b))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Inner and outer sills (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle mount (5.3.6 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output Frosted (4.1.4 (b))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced Inner and outer sills (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle mount (5.3.6 (a) (i))

Rear axle beam corroded

Front Tyre worn close to legal limit/worn on edge BOTH (5.2.3 (e))

Headlamp not working on dipped beam Stuck on high beam (4.1.1 (a) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Tyre worn close to legal limit/worn on edge BOTH (5.2.3 (e))

Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Nearside Front Outer Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arms (5.3.4 (a) (i))

parts of the exhaust system is showing signs of corrosion

Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Nearside Front Outer Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arms (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

parts of the exhaust system is showing signs of corrosion

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Oil leak, but not excessive gearbox (8.4.1 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both bushes (5.1.2 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 24% imbalance (1.2.1 (b) (i))

Vehicles internal headlight adjuster altered to recheck lights ()

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Front Brake disc in such a condition that it is seriously weakened excessively pitted,compromising braking (1.1.14 (a) (ii)) DANGEROUS

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement bushes (5.3.4 (a) (i))

Oil leak, but not excessive gearbox (8.4.1 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both bushes (5.1.2 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 24% imbalance (1.2.1 (b) (i))

Vehicles internal headlight adjuster altered to recheck lights ()

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Both front tyres wearing on inner edges

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Front Windscreen wiper does not clear the windscreen effectively split (8.2.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm 195/45x15 (4.1.E.1)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Front registration plate deteriorated (6.3.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

various body damage on vehicle

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front registration plate displaying a honeycomb or similar effect background (6.3.3)

Nearside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Rear registration plate displaying a honeycomb or similar effect background (6.3.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Headlamp aim too low (1.8)

offside front tyre badly deteriorated

various body damage on vehicle

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

bodywork damage o/s/r

front discs corroding & wearing thin

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

bodywork damage o/s/r

front discs corroding & wearing thin

Front Brake pad(s) wearing thin (3.5.1g)