2002 Aprilia SL1000

Drive chain slightly loose (6.1.7 (c) (i))

Nearside Exhaust silencer slightly loose (8.1.1 (b) (i))

Offside Exhaust silencer slightly loose (8.1.1 (b) (i))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Drive chain slightly loose (6.1.7 (c) (i))

Nearside Exhaust silencer slightly loose (8.1.1 (b) (i))

Offside Exhaust silencer slightly loose (8.1.1 (b) (i))

Rear Lower Suspension arm pin or bush excessively worn rear link and swinging arm to link (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Upper Steering headbearing has slight free play (2.2.2 (f) (i))

Exhaust noisy (7.1.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Offside Front Direction indicator not working (1.5.1c)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear reflector on motorcycle missing (1.4.1)

Registration plate characters incorrectly spaced (6.3.4a)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct stroke width (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Non standard brake hoses fitted to front and rear

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Non standard brake hoses fitted to front and rear

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Drive chain excessively loose (6.2.1d)

Exhaust markings indicating not for road use or similar wording (7.1.4)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Offside Front Footrest insecure (6.2.1a)

Offside Steering lock stop ineffective (2.1.3)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear reflector on motorcycle missing (1.4.1)

Registration plate incorrect (6.3.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front wheel bearings have excessive free play (2.3.5b) DANGEROUS

Steering control has Insufficient clearance at full lock affecting the riders operation of the controls (2.1.2b) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Exhaust noisy (7.1.2)

Front Brake disc(s) has slight run out (3.2.A1m)

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Registration plate with character(s) which are not the correct height (6.3.4a)

Rear suspension bearing has slight free play (2.4.A2a(i))