MOT Status
ExpiredMileage
139,218 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Rear Exhaust mounting defective back box connecting flange corroded badly and poor condition (6.1.2 (a))
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside front brake binding (3.7.B.1)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Exhaust has a minor leak of exhaust gases rear flange (7.1.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.2b)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill (6.1.B.2)
Nearside Front cill corroded
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front cill corroded
Offside Headlamp aim too low (1.8)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Exhaust flange to rear silencer corroded but not leaking.
Exhaust flange before rear silencer is badly corroded but not leaking yet
Front wipers noisey and smeary but clearing the screen sufficiently
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
exhaust system coroded
inner and out sills coroded around rear subframe
Nearside Front All position lamps not working (1.1.A.3b)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
exhaust system coroded
inner and out sills coroded around rear subframe
Nearside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
exhaust system from cat back seems to be getting tender in condition
nearside rear tyre tread miss shaped
Offside Front Tyre worn close to the legal limit (4.1.E.1)
nearside front wheel bearing noisey
nearside rear brake has a slight bind
nearside front wheel bearing slightly noisey
nearside rear tyre slightly miss shaped
offside rear tyre slightly miss shaped
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
Offside Rear brake disc slightly pitted (3.5.1h)
rear brake pads near limit
Centre Rear Stop lamp not working (1.2.1b)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Rear Stop lamp not working (1.2.1b)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
Offside Rear brake disc slightly pitted (3.5.1h)
rear brake pads near limit
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WV03 FPY is a 2003 Mazda 6 in Silver with a 1,999cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 70%.
Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying WV03 FPY, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WV03 FPY?
You can check the full history of WV03 FPY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WV03 FPY registered?
WV03 FPY is a 2003 Mazda 6, first registered on 1 March 2003.
Is WV03 FPY safe to buy?
The MOT history for WV03 FPY shows 20 tests with a 70% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WV03 FPY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WV03 FPY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.