MOT Status
ExpiredMileage
110,186 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear panel is corroded & hole outside of a prescribed area
Offside Rear wheel arch is corroded & covered by tape
Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside wheel arches (2.4.A.3)
offside & nearside outer sill covers fitted
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded floor panel (2.4.A.3)
Offside Front Wheel nut(s) missing (4.2.A.1e)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is excessively corroded floor panel (5.2.6)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear panel is corroded & hole outside of a prescribed area
Offside Rear wheel arch is corroded & covered by tape
Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside wheel arches (2.4.A.3)
offside & nearside outer sill covers fitted
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch (5.2.6)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch) (near upper engine mounting (2.4.A.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch (5.2.6)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch (5.2.6)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive wheel arch (5.2.6)
Rear Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside chassis (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside floor panels (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside inner sills (2.4.A.3)
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Inner Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Headlamp damaged but light output not reduced (1.7.5a)
Offside Inner Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front Headlamp damaged but light output not reduced (1.7.5a)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
sill covers fitted
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside front brake binding (3.7.B.1)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)
Nail in nearside front tyre
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Headlamp aim too low (1.8)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
sill covers fitted
unable to assess nearside front wheel bearing condition due to brake binding
Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Macpherson strut severely distorted (2.4.G.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Brake pad(s) inappropriately repaired (3.5.1n)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front brake disc slightly pitted (3.5.1h)
Front registration plate character(s) incorrectly spaced (6.3.4a)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Rear registration plate character(s) incorrectly spaced (6.3.4a)
front brake discs corroded
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WV03 FVB is a 2003 Mazda 323 in Silver with a 1,991cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying WV03 FVB, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of WV03 FVB?
You can check the full history of WV03 FVB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WV03 FVB registered?
WV03 FVB is a 2003 Mazda 323, first registered on 30 April 2003.
Is WV03 FVB safe to buy?
The MOT history for WV03 FVB shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WV03 FVB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WV03 FVB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.