MOT Status
ExpiredMileage
102,986 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Rear Exhaust system insecure (6.1.2 (a))
Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arches both sides (6.2.2 (d) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Offside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Front all balljoint dust covers perished on suspension/steering
Front Outer Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt both sides (2.4.G.2)
Front Outer Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt both sides (2.2.C.1c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Rear Brake hose slightly deteriorated both (3.6.B.4d)
Vehicle structure has slight corrosion (6.1.A.1)
front tyres wearing on inner edge
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Inner Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Inner Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nail in nearside front tyre
Front brake discs in poor condition.
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Outer body sill covers fitted,not allowing full inspection.
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside rear brake application uneven (3.7.B.2)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Front brake discs in poor condition.
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Outer body sill covers fitted,not allowing full inspection.
both headlight lenses slightly deteriorated
both rear tyres slightly perrished
nearside and offside rear antiroll bar link gaitors slightly deteriorated
nearside wiper rubber split at ends
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Parking brake recording little or no effort (3.7.D.3a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
both headlight lenses slightly deteriorated
both rear tyres slightly perrished
nearside and offside rear antiroll bar link gaitors slightly deteriorated
nearside wiper rubber split at ends
front brake discs slightly pitted
rear tyres slightly perrished
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
Rear Exhaust system not adequately supported (7.1.1)
Front brake disc slightly pitted (3.5.1h)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Front brake disc slightly pitted (3.5.1h)
Rear tyres starting to crack.
Both front brake disc's corroded on inner faces. †
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WV03 FVC is a 2003 Mazda 323 in Silver with a 1,991cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying WV03 FVC, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of WV03 FVC?
You can check the full history of WV03 FVC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WV03 FVC registered?
WV03 FVC is a 2003 Mazda 323, first registered on 25 April 2003.
Is WV03 FVC safe to buy?
The MOT history for WV03 FVC shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WV03 FVC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WV03 FVC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.