2004 Mazda MX-5

Offside Front Upper suspension arm ball joint dust cover slightly deteriorated

Offside Front wing slightly loose

Offside outer sill has slight corrosion

Rear Brake disc worn, pitted or scored, but not seriously weakened both rear discs (1.1.14 (a) (ii))

both rear wings / inner arch slight corrosion

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust has a minor leak of exhaust gases at centre section (6.1.2 (a))

Offside Front Upper suspension arm ball joint dust cover slightly deteriorated

Offside Front wing slightly loose

Offside outer sill has slight corrosion

Rear Brake disc worn, pitted or scored, but not seriously weakened both rear discs (1.1.14 (a) (ii))

both rear wings / inner arch slight corrosion

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor too inner arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength forward chassis leg (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor cross beam section (5.3.6 (a) (i))

Nearside Front brake disc back plate corroded and loose

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Rear Exhaust has a minor leak of exhaust gases Back box joint (6.1.2 (a))

N/S/NO PLATE LAMP IS DULL

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

SUSPENSION COIL SPRINGS AND ARMS ARE CORRODED

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front An item not tested (Manual)

Offside Headlamp aim too far to the right (1.8)

Offside Inner Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside front brake binding (3.7.B.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

offside and nearside rear brake disc badly corroded.