2010 Chevrolet Matiz

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

sill covers fitted

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Front Brakes imbalanced across an axle by more than 50% Axle 1 (1.2.1 (b) (ii)) DANGEROUS

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

sill covers fitted

Front Exhaust has a minor leak of exhaust gases flexible joint (6.1.2 (a))

Front Macpherson strut pin or bush worn but not resulting in excessive movement upper (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Upper Shock absorbers has a slightly worn bush both (5.3.2 (c))

Registration plate deteriorated but not likely to be misread front and rear (0.1 (b))

Nearside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

both front top strut mounts worn slightly

exhaust system corroded

rear wiper blade split

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

both front top strut mounts worn slightly

exhaust system corroded

rear wiper blade split

parts of exhaust starting to corrode

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside h/lamp aim reset , was too high

corrosion on both front b/discs

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement top (5.3.4 (a) (i))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement top (5.3.4 (a) (i))

parts of exhaust starting to corrode

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement top (5.3.4 (a) (i))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement top (5.3.4 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a))

parts of exhaust starting to corrode

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Tyre worn close to the legal limit all four (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Front tyres bald on edges